Swing set
Generated by Statyk with the default parameters of this object (Swing set). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Swing set
- Footprint
- 4 × 6 m
- Built-up area
- 24 m²
- Wall height
- 2.5 m
- Ridge height
- 3.43 m
- Labour hours
- 18 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €487.85
- Labour hours
- 18 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Concrete C20/25Foundation | m³ | 0.11 |
| Bark mulch (impact-absorbing surface)Floor | m³ | 0.04 |
| Swing beam (galvanized)Walls | m | 3 |
| Post 120x120 C24Walls | m | 13.64 |
| Ground anchorFasteners | pcs | 4 |
| Swing chain (galvanized)Finishing | m | 10 |
| Swing seat (flat)Finishing | pcs | 2 |
Start with this exampleDownload PDF
Article about this object · All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.