EV charger
Generated by Statyk with the default parameters of this object (EV charger). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- EV charger
- Footprint
- 4 × 6 m
- Built-up area
- 24 m²
- Wall height
- 2.5 m
- Ridge height
- 3.43 m
- Labour hours
- 10 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €1,654.74
- Labour hours
- 10 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Concrete C25/30 (XC4)Foundation | m³ | 1.55 |
| Steel tube 100x100x3Walls | m | 5.3 |
| Trapezoidal polycarbonate, clear (light band)Roof | m² | 16.05 |
| Installation cable 3 × 2.5 mm² (YDYp)Finishing | m | 10 |
| Circuit breaker (EV)Finishing | pcs | 1 |
| Conduit Ø32 (EV)Finishing | m | 10.5 |
| Earth rod (EV)Finishing | pcs | 1 |
| EV charging pedestal 11 kWFinishing | pcs | 1 |
Start with this exampleDownload PDF
Article about this object · All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.