Dog enclosures and kennels
Generated by Statyk with the default parameters of this object (Dog enclosure). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Dog enclosure
- Footprint
- 3 × 2 m
- Built-up area
- 6 m²
- Wall height
- 1.51 m
- Ridge height
- 1.71 m
- Labour hours
- 24 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €1,834.56
- Labour hours
- 24 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Screw pile headFoundation | pcs | 6 |
| Screw pile 89x2500Foundation | pcs | 6 |
| Impregnated deck boards 28 mmFloor | m² | 6.6 |
| Floor batten 45x95 C24Floor | m | 13.2 |
| Timber cladding boards 21 mm (treated)Walls | m² | 4.98 |
| Hot-dip galvanisingWalls | kg | 223.1 |
| Steel bar Ø10 (enclosure infill)Walls | m | 150.96 |
| Square tube 30×30×2 (enclosure frame)Walls | m | 48.83 |
| Roof steel sheet T35Roof | m² | 7.64 |
| Square tube 30×30×2 (enclosure frame)Roof | m | 26.08 |
| Enclosure door hardware (hinges, latch, lock)Openings | set | 1 |
| Swivel feeder with 2 bowlsOpenings | pcs | 1 |
| Square tube 30×30×2 (enclosure frame)Openings | m | 5.27 |
| Self-drilling screws 35 mmFasteners | pcs | 53 |
| Wood screws 60 mmFasteners | pcs | 280 |
| Timber cladding boards 21 mm (treated)Kennel | m² | 3.85 |
| EPS 100 insulationKennel | m³ | 0.15 |
| Kennel entrance PVC flapKennel | pcs | 1 |
| Adjustable kennel legKennel | pcs | 4 |
| Roof underlayKennel | m² | 1.44 |
| OSB/3 board 12 mmKennel | m² | 4.71 |
| OSB/3 board 18 mmKennel | m² | 0.95 |
| Bitumen shinglesKennel | m² | 1.44 |
| Batten 45x45 C24Kennel | m | 19.07 |
| Exterior wood stain / oilKennel | l | 0.74 |
Start with this exampleDownload PDF
Article about this object · All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.