Workshop 6 × 9 m, frame only
Generated by Statyk with the default parameters of this object (Workshop). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Workshop
- Footprint
- 6 × 9 m
- Built-up area
- 54 m²
- Wall height
- 3.2 m
- Ridge height
- 4.18 m
- Labour hours
- 197 h
Structural engineer approval required
Indicative cost
- Materials (incl. waste, incl. VAT)
- €12,328.67
- Labour hours
- 197 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Column anchor bolt setFoundation | set | 10 |
| Concrete C20/25Foundation | m³ | 2.69 |
| Formwork (boards / panels, rental)Foundation | m² | 14.08 |
| Column base plate with stiffeners (I-section)Walls | pcs | 10 |
| Wind bracing rod Ø16 with turnbucklesWalls | m | 36.84 |
| C-section girt 150Walls | m | 50.88 |
| HEA 200 I-section (column, provisional size)Walls | m | 33.28 |
| Roof sandwich panels 100 mmRoof | m² | 72.05 |
| Wind bracing rod Ø16 with turnbucklesRoof | m | 38.53 |
| Frame joint set (eave haunches, apex joint, bolts)Roof | set | 4 |
| IPE 300 I-section (rafter, provisional size)Roof | m | 28.87 |
| Z-section purlin 150Roof | m | 47.08 |
| Sandwich panel 80 mmExternal cladding | m² | 86.22 |
| Anchor bolt M12Fasteners | pcs | 31 |
| Post connectorFasteners | pcs | 11 |
| Self-drilling screws 35 mmFasteners | pcs | 1,195 |
Start with this exampleDownload PDF
All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.