Retaining wall
Generated by Statyk with the default parameters of this object (Retaining wall). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Retaining wall
- Footprint
- 10 × 2.2 m
- Built-up area
- 22 m²
- Wall height
- 0.8 m
- Ridge height
- 0.88 m
- Labour hours
- 34 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €1,359.04
- Labour hours
- 34 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Crushed stone / gravel 0–32Foundation | m³ | 3.99 |
| Non-woven geotextile 150 g/m²Foundation | m² | 16.17 |
| Pond excavation with a mini excavatorFoundation | m³ | 6.62 |
| Retaining wall blocks (dry-stack), face m²Walls | m² | 10.08 |
| Drain pipe Ø110 with geotextile sockRainwater drainage | m | 12.6 |
Start with this exampleDownload PDF
Article about this object · All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.