Swimming pool 8 × 4 m
Generated by Statyk with the default parameters of this object (Swimming pool). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Swimming pool
- Footprint
- 8 × 4 m
- Built-up area
- 32 m²
- Wall height
- 0.15 m
- Ridge height
- 0.29 m
- Labour hours
- 193 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €28,885.08
- Labour hours
- 193 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Crushed stone / gravel 0–32Foundation | m³ | 6.53 |
| Concrete C20/25Foundation | m³ | 13.79 |
| Excavation and soil removalFoundation | m³ | 81 |
| Rebar mesh 150x150Foundation | m² | 43.52 |
| Composite pool shellWalls | m² | 32 |
| Pool ladder (stainless)Openings | pcs | 1 |
| Safety signs (depth, no diving)Openings | set | 1 |
| Main drain with grate (≤ 8 mm)Building services | pcs | 1 |
| Chlorine and pH dosing systemBuilding services | set | 1 |
| Drain pump and dechlorinationBuilding services | set | 1 |
| Sand filter with pump (up to 20 m³/h)Building services | set | 1 |
| Pool heat pumpBuilding services | pcs | 1 |
| Return inletBuilding services | pcs | 4 |
| Pool piping Ø50 with fittingsBuilding services | m | 37.4 |
| SkimmerBuilding services | pcs | 2 |
| Crushed stone / gravel 0–32Site | m³ | 6.16 |
| SandSite | m³ | 1.23 |
| 3D fence panel (infill)Site | m² | 50.4 |
| GeotextileSite | m² | 30.8 |
| Concrete paving blocks 60 mmSite | m² | 29.4 |
| Pool coping stonesSite | m | 25.2 |
| Self-closing fence gateSite | pcs | 1 |
| Post 60×60×2 (wicket)Site | m | 28.02 |
Start with this exampleDownload PDF
All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.