Rabbit hutch 2,4 × 0,7 m
Generated by Statyk with the default parameters of this object (Rabbit hutch). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Rabbit hutch
- Footprint
- 2.4 × 0.7 m
- Built-up area
- 1.7 m²
- Wall height
- 2.02 m
- Ridge height
- 2.17 m
- Labour hours
- 28 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €978.24
- Labour hours
- 28 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Floor batten 45x95 C24Foundation | m | 3.52 |
| Pull-out droppings trayFloor | pcs | 9 |
| OSB/3 board 18 mmFloor | m² | 1.36 |
| Rabbit floor mesh (galvanised, fine aperture)Floor | m² | 5.29 |
| OSB/3 board 12 mmWalls | m² | 2.27 |
| Batten 45x45 C24Walls | m | 71.97 |
| Roof underlayRoof | m² | 2.62 |
| OSB/3 board 12 mmRoof | m² | 2.57 |
| Roof steel sheet T35Roof | m² | 2.57 |
| Timber cladding boards 21 mm (treated)External cladding | m² | 7.92 |
| Exterior wood stain / oilExternal cladding | l | 1.51 |
| Small door hardware (2 hinges, latch)Openings | set | 9 |
| Welded galvanised meshOpenings | m² | 3.78 |
| Drinker with ball valveOpenings | pcs | 9 |
| Hay rack (galvanised)Openings | pcs | 9 |
| Rabbit nest box with lidOpenings | pcs | 3 |
| Wood screws 60 mmFasteners | pcs | 308 |
Start with this exampleDownload PDF
All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.