Guard / watch tower 3,6 × 3,6 m
Generated by Statyk with the default parameters of this object (Guard / watch tower). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Guard / watch tower
- Footprint
- 3.6 × 3.6 m
- Built-up area
- 13 m²
- Wall height
- 9.73 m
- Ridge height
- 9.86 m
- Labour hours
- 166 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €5,833.40
- Labour hours
- 166 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Column anchor bolt setFoundation | set | 4 |
| Concrete C20/25Foundation | m³ | 1.51 |
| Impregnated deck boards 28 mmFloor | m² | 15.84 |
| Rectangular tube 80×40×3 (opening frames)Floor | m | 15.12 |
| Stud 45x145 C24Floor | m | 31.68 |
| Mineral woolWalls | m³ | 1.56 |
| OSB/3 board 12 mmWalls | m² | 15.9 |
| Galvanised stair tread 800 mmWalls | pcs | 36 |
| Steel bar Ø10 (enclosure infill)Walls | m | 352.8 |
| Wind bracing rod Ø16 with turnbucklesWalls | m | 108.11 |
| Steel tube 100x100x3, hot-dip galvanisedWalls | m | 44.52 |
| Rectangular tube 80×40×3 (opening frames)Walls | m | 31.08 |
| Square tube 40×40×2 (table frame)Walls | m | 114.66 |
| Floor batten 45x95 C24Walls | m | 69.52 |
| Roof steel sheet T35Roof | m² | 10.86 |
| Stud 45x145 C24Roof | m | 20.1 |
| Wall steel sheet T20External cladding | m² | 15.75 |
| Steel doorOpenings | pcs | 1 |
| PVC windowOpenings | m² | 4.8 |
| LED floodlight 100 W, IP65Building services | pcs | 2 |
Start with this exampleDownload PDF
All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.