Carport 6 × 6 m
Generated by Statyk with the default parameters of this object (Carport). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Carport
- Footprint
- 6 × 6 m
- Built-up area
- 36 m²
- Wall height
- 2.5 m
- Ridge height
- 3.78 m
- Labour hours
- 236 h
Structural engineer approval required
Indicative cost
- Materials (incl. waste, incl. VAT)
- €4,201.51
- Labour hours
- 236 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Column anchor bolt setFoundation | set | 12 |
| Concrete C20/25Foundation | m³ | 3.23 |
| Formwork (boards / panels, rental)Foundation | m² | 16.9 |
| Wind barrier membraneWalls | m² | 24.92 |
| Post base plateWalls | pcs | 12 |
| Wind bracing rod Ø16 with turnbucklesWalls | m | 26.9 |
| Column head connection (cap and 2 side plates, M12 bolts, galvanised)Walls | set | 12 |
| C-section girt 150Walls | m | 6.36 |
| Steel tube 100x100x3Walls | m | 43.96 |
| Roof underlayRoof | m² | 48.98 |
| Roof steel sheet T35Roof | m² | 53.86 |
| Wind bracing rod Ø16 with turnbucklesRoof | m | 29.56 |
| Steel tube 100x100x3Roof | m | 28.61 |
| Z-section purlin 150Roof | m | 31.47 |
| Wall steel sheet T20External cladding | m² | 26.66 |
| Downpipe 100 mmRainwater drainage | m | 5.25 |
| Gutter 150 mmRainwater drainage | m | 6.93 |
| Gutter bracketRainwater drainage | pcs | 11 |
| Anchor bolt M12Fasteners | pcs | 25 |
| Post connectorFasteners | pcs | 13 |
| Self-drilling screws 35 mmFasteners | pcs | 578 |
Start with this exampleDownload PDF
All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.