Arched hangar
Generated by Statyk with the default parameters of this object (Arched hangar). A preliminary solution, not a design; calculations must be checked by a specialist.
Key facts
- Object
- Arched hangar
- Footprint
- 24 × 15 m
- Built-up area
- 360 m²
- Wall height
- 0.1 m
- Ridge height
- 0.62 m
- Labour hours
- 259 h
Indicative cost
- Materials (incl. waste, incl. VAT)
- €17,369.78
- Labour hours
- 259 h
Preliminary prices from catalogue lt-2026-10 (2026-10-25). This is an example, not an offer: supplier prices vary and labour depends on your rate – you enter it and your own materials in the generator. Catalogue prices are still being verified.
Drawings
Material quantities
Quantities include waste allowance. The generator shows the price with your own materials and labour rate.
| Material | Unit | Quantity (with waste) |
|---|---|---|
| Concrete C20/25Foundation | m³ | 7.56 |
| Formwork (boards / panels, rental)Foundation | m² | 31.68 |
| Lightweight block 500x250x200Walls | pcs | 485 |
| Masonry mortar M5Walls | m³ | 0.75 |
| Steel tube 100x100x3Walls | m | 97.51 |
| PVC tent fabric (~650 g/m²)Roof | m² | 726.67 |
| Bent steel arch (tube Ø76×3.2)Roof | m | 300.56 |
| Post base plateRoof | pcs | 26 |
| Wind bracing rod Ø16 with turnbucklesRoof | m | 94 |
| Tent tension straps and fixings (per arch)Roof | set | 13 |
| Floor batten 45x95 C24Roof | m | 528 |
| Hangar gate (frame with infill)Openings | m² | 23.63 |
| Steel tube 100x100x3Openings | m | 14.84 |
| Anchor bolt M12Fasteners | pcs | 107 |
Start with this exampleDownload PDF
Article about this object · All example projects · Find a specialist to prepare or check the design
Rule set lt-v1, catalogue lt-2026-10.